Configuring Performance Parameters

The Performance Configuration option enables you to configure the read_select_timeout parameter value for the Licence Server.

To configure the read_select_timeout parameter value:

Open PROIV Control Panel.

Click Licensing and then expand Licence Server Configuration.

Click Performance Configuration.

Enter the timeout value in the Read Select Timeout field.

Field

Description

Read Select Timeout

Enter a value to configure the read_select_timeout parameter, which sets the PROIV Licence Server's maximum wait time when it attempts to retrieve (read) data through NIO (Non-blocking I/O) data transfers before timing out.

The default setting is sufficient for many java-dependent applications that use NIO buffers. However, if other processes are consuming resources that are resulting in frequent read select timeouts, then increasing the value reduces the CPU load (i.e. fewer read NIO buffer retries).

The default value is 10 milliseconds, the maximum value is 1000 milliseconds.

Save Performance Parameters Configuration

Saves timeout value.

Click Save Performance Parameters Configuration.

Restart the PROIV Licence Server service from the Services option in the Windows Control Panel for the changes to take effect.

Warning: The PROIV Licence Server service must be restarted from the Services option in the Windows Control Panel before the Performance Parameter changes take effect. Stopping or re-starting the PROIV Licence Server from the PROIV Control Panel will not reload the new read_select_timeout parameter value into the Licence Server.

Topic ID: 770013